Agilent PPA Firmware Release Notes Peak Power Analyzer Firmware Release Notes free download

File name PPA_Firmware_Release_Notes Peak Power Analyzer Firmware Release Notes.txt

Release 1.2.3.0 (30 August 2013) -------------------------------- Addede new features: 1) Multi-pulse capture and analysis - Up to 512 frames - Easy measurement pulse to pulse comparison tool - Histogram for distribution viewing - Licensed Option with 30 day trial 2) Enhanced waveform math functions 3) New X vs Y Plot, viewing in between channels/waveform math operations 4) Pulse width triggering 5) SCPI support for Marker Search Fixed issues: 1) Trace become weird when pulse is small and timescale is large 2) Marker placement not being at the threshold value % set previously 3) Restore Saved Setup does not remember Run\Pause state 4) Default Preset does not clear selected FDO Table 5) Droop measurement settings not saved/restored in Save Current Setup / Restore Saved Setup 6) Error which require PPA application to abort when placing both markers on function trace 7) Wrong maximum limit for Zoom mode when scale is not in multiples of 1,2, and 5 8) Wrong measurment units for Peak and Average power in CCDF 9) Other fixes Known issues: 1) PPA soft-keyboard contains corrupted key symbol for the 4 arrow buttons. 2) LXI Lan interface may be broken after performing a direct upgrade from previous CDF based version. Recommended to do a complete uninstall of the older version before performing the upgrade 3) Sampling rate at certain high time-base settings has been degraded due to firmware design change. Will revert to the original sampling rate in the next FW release. Release 1.2.2.0 (14 December 2012) ---------------------------------- - Added time information on the x-axis, able to hide the side and bottom panels - Markers enhancement (XY flexible movement, independent triggering, X search, Y search) - Improve Averaging speed improvement by 50% - User selectable ETS threshold (to measure 802.11ac burst signals) - Advanced waveform math (Include Power Added Efficiency math function) - Added logging feature - Added limit test features - Report generator - Measurement toggle (zoom/main) in Zoom mode (able to measure in both main and zoom window) - Enable pulse spacing inter-channels (select any 2 of the 4 channels) - Added User defined time compensation (offset) feature for Channel 1, 2, 3, 4 - CCDF graph to display lines and dots - Set CCDF duration based on trace length from Main graph when switching to CCDF mode. - Trace split screen and others - Fixed other minor FW/SW issues Release 1.2.1.0 (25 April 2012) ------------------------------- - Enhanced marker knob to improve knob sensitivity. - Fixed sensor hotplug issue during stop mode. - Improve time resolution for 14 points time measurement - Enabled Close and Minimize button when PPA is launched. - Allowed clear ETS when ETS is enabled whenever there is a change in the channel settings. - Fixed and refined marker knob sensitivity in Zoom mode. - Upgraded Peak Power Analyzer Help file to version 2.0. - Added 14 points measur